Important safety information
Silicone aerosol release and lubricating product for professional use. This webpage is a product safety summary and does not replace the official safety data sheet. Request the current official SDS from Hotset UK before use.
01 — Safety information
Identification of the substance/mixture and of the company/undertaking
1.1. Product identifier
Product name: (HOTSET) SILICONE MOULD RELEASE
Product code: HC8015
Synonyms: SMR1
1.2. Relevant identified uses of the substance or mixture and uses advised against
Use of substance / mixture: Aerosol lubricant.02 — Safety information
Hazards identification
2.1. Classification of the substance or mixture
Classification under CLP: Flam. Aerosol 1: H222; STOT SE 3: H336; Aquatic Chronic 2: H411; -: H229
Most important adverse effects: Pressurised container: May burst if heated. Extremely flammable aerosol. May cause
drowsiness or dizziness. Toxic to aquatic life with long lasting effects.
2.2. Label elements
Label elements:
Hazard statements: H229: Pressurised container: May burst if heated.
H222: Extremely flammable aerosol.
H336: May cause drowsiness or dizziness.
H411: Toxic to aquatic life with long lasting effects.
Hazard pictograms: GHS02: Flame
GHS07: Exclamation mark
GHS09: Environmental [cont...]
Signal words: Danger
Precautionary statements: P102: Keep out of reach of children.
P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition
sources. No smoking.
P211: Do not spray on an open flame or other ignition source.
P251: Do not pierce or burn, even after use.
P262: Do not get in eyes, on skin, or on clothing.
P260: Do not breathe vapours.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P271: Use only outdoors or in a well-ventilated area.
P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for
breathing.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
Haz. ingredients (label): Contains:
ALIPHATIC HYDROCARBON BLEND
LIQUIFIED PETROEUM GAS PROPELLANT
2.3. Other hazards
Other hazards: In use, may form flammable / explosive vapour-air mixture.
PBT: This product is not identified as a PBT/vPvB substance.03 — Safety information
Composition/information on ingredients
3.2. Mixtures
Hazardous ingredients:
HYDROCARBONS C6-C7 ISOALKANES, CYCLICS, <5% N-HEXANE, <0.1% BENZENE - REACH registered number
(s): 01-2119475514-35-XXXX
EINECS CAS PBT / WEL CLP Classification Percent
265-151-9 64742-49-0 - Flam. Liq. 2: H225; STOT SE 3: H336; 30-50%
Asp. Tox. 1: H304; Aquatic Chronic 2:
H411; Skin Irrit. 2: H315
PROPANE, <0.1% 1,3 BUTADIENE - REACH registered number(s): 01-2119486944-21-XXXX
200-827-9 74-98-6 Substance with a Community Flam. Gas 1: H220; Press. Gas: H280 10-30%
workplace exposure limit.
[cont...]
BUTANE, <0.1% 1,3 BUTADIENE - REACH registered number(s): 01-2119474691-32-XXXX
203-448-7 106-97-8 Substance with a Community Flam. Gas 1: H220; Press. Gas: H280 10-30%
workplace exposure limit.04 — Safety information
First aid measures
4.1. Description of first aid measures
Skin contact: Wash immediately with plenty of soap and water.
Eye contact: Bathe the eye with running water for 15 minutes.
Ingestion: Wash out mouth with water. Do not induce vomiting. If conscious, give half a litre of water
to drink immediately.
Inhalation: Move to fresh air in case of accidental inhalation of vapours.
4.2. Most important symptoms and effects, both acute and delayed
Skin contact: There may be irritation and redness at the site of contact.
Eye contact: There may be irritation and redness. The eyes may water profusely.
Ingestion: There may be soreness and redness of the mouth and throat. Nausea and stomach
pain may occur. There may be vomiting.
Inhalation: There may be irritation of the throat with a feeling of tightness in the chest.
Delayed / immediate effects: Immediate effects can be expected after short-term exposure.
4.3. Indication of any immediate medical attention and special treatment needed
Immediate / special treatment: Not applicable.05 — Safety information
Fire-fighting measures
5.1. Extinguishing media
Extinguishing media: Alcohol or polymer foam. Carbon dioxide. Dry chemical powder. Use water spray to cool
containers.
5.2. Special hazards arising from the substance or mixture
Exposure hazards: Highly flammable. In combustion emits toxic fumes. Forms explosive air-vapour mixture.
Vapour may travel considerable distance to source of ignition and flash back. Aerosol
cans may explode during a fire, giving a high speed projectile.
5.3. Advice for fire-fighters
Advice for fire-fighters: Wear self-contained breathing apparatus. Wear protective clothing to prevent contact
with skin and eyes.06 — Safety information
Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
Personal precautions: Refer to section 8 of SDS for personal protection details. If outside do not approach from
downwind. If outside keep bystanders upwind and away from danger point. Mark out the
contaminated area with signs and prevent access to unauthorised personnel. Eliminate
[cont...]
all sources of ignition. Cover leaking can until the discharge has stopped, before
attempting cleanup operations. Spillage will create slippery surface.
6.2. Environmental precautions
Environmental precautions: Do not discharge into drains or rivers. Contain the spillage using bunding.
6.3. Methods and material for containment and cleaning up
Clean-up procedures: Absorb into dry earth or sand. Transfer to a closable, labelled salvage container for
disposal by an appropriate method. Do not use equipment in clean-up procedure which
may produce sparks. Wash the ground with an appropriate self-emulsifying solvent.
6.4. Reference to other sections
Reference to other sections: Refer to section 8 of SDS.07 — Safety information
Handling and storage
7.1. Precautions for safe handling
Handling requirements: Avoid direct contact with the substance. Ensure there is sufficient ventilation of the area.
Do not handle in a confined space. Avoid the formation or spread of mists in the air.
Smoking is forbidden. Use non-sparking tools.
7.2. Conditions for safe storage, including any incompatibilities
Storage conditions: Store in a cool, well ventilated area. Keep away from sources of ignition. Keep away from
direct sunlight.
7.3. Specific end use(s)
Specific end use(s): No data available.08 — Safety information
Exposure controls/personal protection
8.1. Control parameters
Hazardous ingredients:
HYDROCARBONS C6-C7 ISOALKANES, CYCLICS, <5% N-HEXANE, <0.1% BENZENE
Workplace exposure limits: Respirable dust:
State 8 hour TWA 15 min. STEL 8 hour TWA 15 min. STEL
UK 1100 mg/m3 2200 mg/m3 - -
PROPANE, <0.1% 1,3 BUTADIENE
UK Asphyxiating Asphyxiating - -
BUTANE, <0.1% 1,3 BUTADIENE
UK 1450 mg/m3 1810 mg/m3 - -
DNEL/PNEC Values
DNEL / PNEC No data available.
[cont...]
8.2. Exposure controls
Engineering measures: Ensure there is sufficient ventilation of the area. Ensure lighting and electrical
equipment are not a source of ignition.
Respiratory protection: Self-contained breathing apparatus must be available in case of emergency.
Hand protection: Impermeable gloves.
Eye protection: Safety glasses. Ensure eye bath is to hand.
Skin protection: Impermeable protective clothing.09 — Safety information
Physical and chemical properties
9.1. Information on basic physical and chemical properties
State: Aerosol
Colour: Colourless
Odour: Barely perceptible odour
Evaporation rate: Fast
Solubility in water: Insoluble
Viscosity: Viscosity develops on drying.
Boiling point/range°C: 55 - 95 Melting point/range°C: Not applicable.
Flammability limits %: lower: 0.8 upper: 9.0
Flash point°C: <0 Part.coeff. n-octanol/water: No data available.
Autoflammability°C: >230 Vapour pressure: Not applicable.
Relative density: Not applicable. pH: Not applicable.
VOC g/l: 558
9.2. Other information
Other information: No data available.10 — Safety information
Stability and reactivity
10.1. Reactivity
Reactivity: Stable under recommended transport or storage conditions.
10.2. Chemical stability
Chemical stability: Stable under normal conditions. Stable at room temperature.
10.3. Possibility of hazardous reactions
Hazardous reactions: Hazardous reactions will not occur under normal transport or storage conditions.
Decomposition may occur on exposure to conditions or materials listed below.
10.4. Conditions to avoid
Conditions to avoid: Heat. Hot surfaces. Sources of ignition. Flames. Direct sunlight.
10.5. Incompatible materials
Materials to avoid: Strong oxidising agents. Strong acids.
[cont...]
10.6. Hazardous decomposition products
Haz. decomp. products: In combustion emits toxic fumes.11 — Safety information
Toxicological information
11.1. Information on toxicological effects
Hazardous ingredients:
HYDROCARBONS C6-C7 ISOALKANES, CYCLICS, <5% N-HEXANE, <0.1% BENZENE
DERMAL RBT LD50 3350 mg/kg
ORAL RAT LD50 16750 mg/kg
VAPOURS RAT 4H LC50 259 g/l
Relevant hazards for product:
Hazard Route Basis
STOT-single exposure - Hazardous: calculated
Symptoms / routes of exposure
Skin contact: There may be irritation and redness at the site of contact.
Eye contact: There may be irritation and redness. The eyes may water profusely.
Ingestion: There may be soreness and redness of the mouth and throat. Nausea and stomach
pain may occur. There may be vomiting.
Inhalation: There may be irritation of the throat with a feeling of tightness in the chest.
Delayed / immediate effects: Immediate effects can be expected after short-term exposure.12 — Safety information
Ecological information
12.1. Toxicity
Hazardous ingredients:
HYDROCARBONS C6-C7 ISOALKANES, CYCLICS, <5% N-HEXANE, <0.1% BENZENE
Daphnia magna 48H EC50 17.06 mg/l
RAINBOW TROUT (Oncorhynchus mykiss) 96H LC50 9.766 mg/l
12.2. Persistence and degradability
Persistence and degradability: The product is expected to be biodegradable
12.3. Bioaccumulative potential
Bioaccumulative potential: No bioaccumulation potential.
12.4. Mobility in soil
Mobility: Readily absorbed into soil. Volatile. Insoluble in water. Floats on water. Vapour is heavier
than air.
[cont...]
12.5. Results of PBT and vPvB assessment
PBT identification: This product is not identified as a PBT/vPvB substance.
12.6. Other adverse effects
Other adverse effects: Toxic to aquatic organisms. Toxic to soil organisms.13 — Safety information
Disposal considerations
13.1. Waste treatment methods
Disposal operations: Transfer to a suitable container and arrange for collection by specialised disposal
company.
Recovery operations: Recycling/reclamation of metals and metal compounds.
Waste code number: 16 05 05
Disposal of packaging: Empty cans must not be burned because of explosion hazard. Recycle container where
permitted. Disposal of waste containers must be done in accordance with local and / or
national regulations.
NB: The user's attention is drawn to the possible existence of regional or national
regulations regarding disposal.14 — Safety information
Transport information
14.1. UN number
UN number: UN1950
14.2. UN proper shipping name
Shipping name: AEROSOLS
14.3. Transport hazard class(es)
Transport class: 2
14.4. Packing group
14.5. Environmental hazards
Environmentally hazardous: Yes Marine pollutant: No
14.6. Special precautions for user
Special precautions: No special precautions.
Tunnel code: D
Transport category: 215 — Safety information
Regulatory information
15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
Specific regulations: Not applicable.
[cont...]
15.2. Chemical Safety Assessment
Chemical safety assessment: A chemical safety assessment has not been carried out for the substance or the mixture
by the supplier.16 — Safety information
Other information
Other information
Other information: This safety data sheet has been prepared in accordance with Commission Regulation
(EU) No. 2020/878.
Phrases used in s.2 and s.3: H220: Extremely flammable gas.
H222: Extremely flammable aerosol.
H225: Highly flammable liquid and vapour.
H229: Pressurised container: May burst if heated.
H304: May be fatal if swallowed and enters airways.
H315: Causes skin irritation.
H336: May cause drowsiness or dizziness.
H411: Toxic to aquatic life with long lasting effects.
Legal disclaimer: The above information is believed to be correct but does not purport to be all inclusive
and shall be used only as a guide. This company shall not be held liable for any
damage resulting from handling or from contact with the above product. For professional
and industrial use only.
[final page]