Important safety information
Non-silicone aerosol release product for professional moulding applications. This webpage is a product safety summary and does not replace the official safety data sheet. Request the current official SDS from Hotset UK before use.
01 — Safety information
Identification of the substance/mixture and of the company/undertaking
1.1. Product identifier
Product name: (HOTSET) NON-SILICONE MOULD RELEASE
Product code: HC8593
Synonyms: HC8593
PD1359/2
1.2. Relevant identified uses of the substance or mixture and uses advised against
Use of substance / mixture: PC24: Lubricants, greases, release products.02 — Safety information
Hazards identification
2.1. Classification of the substance or mixture
Classification under CLP: Skin Irrit. 2: H315; STOT SE 3: H336; Aquatic Chronic 2: H411; Flam. Aerosol 1: H222; -:
H229
Most important adverse effects: Extremely flammable aerosol. Pressurised container: May burst if heated. Causes skin
irritation. May cause drowsiness or dizziness. Toxic to aquatic life with long lasting
effects.
2.2. Label elements
Label elements:
Hazard statements: H222: Extremely flammable aerosol.
H229: Pressurised container: May burst if heated.
H315: Causes skin irritation.
[cont...]
H336: May cause drowsiness or dizziness.
H411: Toxic to aquatic life with long lasting effects.
Hazard pictograms: GHS02: Flame
GHS07: Exclamation mark
GHS09: Environmental
Signal words: Danger
Precautionary statements: P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition
sources. No smoking.
P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C.
P211: Do not spray on an open flame or other ignition source.
P251: Do not pierce or burn, even after use.
P271: Use only outdoors or in a well-ventilated area.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P302+P352: IF ON SKIN: Wash with plenty of soap and water.
P273: Avoid release to the environment.
Haz. ingredients (label): Contains: HYDROCARBONS C6-C7 ISOALKANES, CYCLICS, <5% N-HEXANE, <0.1%
BENZENE
2.3. Other hazards
PBT: This product is not identified as a PBT/vPvB substance.03 — Safety information
Composition/information on ingredients
3.2. Mixtures
Hazardous ingredients:
HYDROCARBONS C6-C7 ISOALKANES, CYCLICS, <5% N-HEXANE, <0.1% BENZENE - REACH registered number
(s): 01-2119475514-35-XXXX
EINECS CAS PBT / WEL CLP Classification Percent
265-151-9 64742-49-0 - Flam. Liq. 2: H225; STOT SE 3: H336; 50-70%
Asp. Tox. 1: H304; Aquatic Chronic 2:
H411; Skin Irrit. 2: H315
PROPANE, <0.1% 1,3 BUTADIENE - REACH registered number(s): 01-2119486944-21-XXXX
200-827-9 74-98-6 Substance with a Community Flam. Gas 1: H220; Press. Gas: H280 10-30%
workplace exposure limit.
[cont...]
BUTANE, <0.1% 1,3 BUTADIENE - REACH registered number(s): 01-2119474691-32-XXXX
203-448-7 106-97-8 Substance with a Community Flam. Gas 1: H220; Press. Gas: H280 10-30%
workplace exposure limit.04 — Safety information
First aid measures
4.1. Description of first aid measures
Skin contact: Remove all contaminated clothes and footwear immediately unless stuck to skin. Wash
immediately with plenty of soap and water.
Eye contact: Bathe the eye with running water for 15 minutes. Consult a doctor.
Ingestion: Wash out mouth with water. Consult a doctor.
Inhalation: Remove casualty from exposure ensuring one's own safety whilst doing so. Consult a
doctor in case of complaints
4.2. Most important symptoms and effects, both acute and delayed
Skin contact: There may be irritation and redness at the site of contact.
Eye contact: There may be irritation and redness. The eyes may water profusely.
Ingestion: There may be soreness and redness of the mouth and throat.
Inhalation: There may be irritation of the throat with a feeling of tightness in the chest. Exposure may
cause coughing or wheezing.
Delayed / immediate effects: Immediate effects can be expected after short-term exposure.
4.3. Indication of any immediate medical attention and special treatment needed
Immediate / special treatment: Eye bathing equipment should be available on the premises.05 — Safety information
Fire-fighting measures
5.1. Extinguishing media
Extinguishing media: Suitable extinguishing media for the surrounding fire should be used. Use water spray
to cool containers.
5.2. Special hazards arising from the substance or mixture
Exposure hazards: In combustion emits toxic fumes. Aerosol cans may explode during a fire, giving a high
speed projectile.
5.3. Advice for fire-fighters
Advice for fire-fighters: Wear self-contained breathing apparatus. Wear protective clothing to prevent contact
with skin and eyes.06 — Safety information
Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
Personal precautions: Cover leaking can until the discharge has stopped, before attempting cleanup
operations. Refer to section 8 of SDS for personal protection details. If outside do not
approach from downwind. If outside keep bystanders upwind and away from danger
[cont...]
point. Mark out the contaminated area with signs and prevent access to unauthorised
personnel.
6.2. Environmental precautions
Environmental precautions: Do not discharge into drains or rivers. Contain the spillage using bunding.
6.3. Methods and material for containment and cleaning up
Clean-up procedures: Ventilate area well. Extinguish all ignition sources. Avoid sparks, flames, smoking and
any other heat sources. Absorb into dry earth or sand. Transfer to a closable, labelled
salvage container for disposal by an appropriate method.
6.4. Reference to other sections
Reference to other sections: Refer to section 8 of SDS.07 — Safety information
Handling and storage
7.1. Precautions for safe handling
Handling requirements: Avoid direct contact with the substance. Ensure there is sufficient ventilation of the area.
Do not handle in a confined space. Avoid the formation or spread of mists in the air.
7.2. Conditions for safe storage, including any incompatibilities
Storage conditions: Store in a cool, well ventilated area. Keep container tightly closed. The floor of the
storage room must be impermeable to prevent the escape of liquids.
7.3. Specific end use(s)
Specific end use(s): No data available.08 — Safety information
Exposure controls/personal protection
8.1. Control parameters
Hazardous ingredients:
HYDROCARBONS C6-C7 ISOALKANES, CYCLICS, <5% N-HEXANE, <0.1% BENZENE
Workplace exposure limits: Respirable dust:
State 8 hour TWA 15 min. STEL 8 hour TWA 15 min. STEL
UK 1100 mg/m3 2200 mg/m3 - -
PROPANE, <0.1% 1,3 BUTADIENE
UK Asphyxiating Asphyxiating - -
BUTANE, <0.1% 1,3 BUTADIENE
UK 1450 mg/m3 1810 mg/m3 - -
DNEL/PNEC Values
DNEL / PNEC No data available.
[cont...]
8.2. Exposure controls
Engineering measures: Ensure there is sufficient ventilation of the area. The floor of the storage room must be
impermeable to prevent the escape of liquids.
Respiratory protection: Self-contained breathing apparatus must be available in case of emergency.
Hand protection: Protective gloves.
Eye protection: Safety glasses. Ensure eye bath is to hand.
Skin protection: Protective clothing.
Environmental: Prevent from entering in public sewers or the immediate environment.09 — Safety information
Physical and chemical properties
9.1. Information on basic physical and chemical properties
State: Aerosol
Colour: Pale yellow
Odour: Perceptible odour
Evaporation rate: Fast
Oxidising: Non-oxidising (by EC criteria)
Solubility in water: Insoluble
Viscosity: Non-viscous
Boiling point/range°C: >35 Melting point/range°C: No data available.
Flammability limits %: lower: 0.80 upper: 9.00
Flash point°C: -40 Part.coeff. n-octanol/water: No data available.
Autoflammability°C: >230 Vapour pressure: No data available.
Relative density: 0.70 pH: No data available.
VOC g/l: No data available.
9.2. Other information
Other information: No data available.10 — Safety information
Stability and reactivity
10.1. Reactivity
Reactivity: Stable under recommended transport or storage conditions.
10.2. Chemical stability
Chemical stability: Stable under normal conditions.
10.3. Possibility of hazardous reactions
Hazardous reactions: Hazardous reactions will not occur under normal transport or storage conditions.
Decomposition may occur on exposure to conditions or materials listed below.
10.4. Conditions to avoid
Conditions to avoid: Heat. Sources of ignition. Hot surfaces. Direct sunlight. Freezing
[cont...]
10.5. Incompatible materials
Materials to avoid: Strong oxidising agents. Strong acids.
10.6. Hazardous decomposition products
Haz. decomp. products: In combustion emits toxic fumes.11 — Safety information
Toxicological information
11.1. Information on toxicological effects
Hazardous ingredients:
HYDROCARBONS C6-C7 ISOALKANES, CYCLICS, <5% N-HEXANE, <0.1% BENZENE
DERMAL RBT LD50 3350 mg/kg
ORAL RAT LD50 16750 mg/kg
VAPOURS RAT 4H LC50 259 g/l
Relevant hazards for product:
Hazard Route Basis
Skin corrosion/irritation DRM Hazardous: calculated
STOT-single exposure - Hazardous: calculated
Symptoms / routes of exposure
Skin contact: There may be irritation and redness at the site of contact.
Eye contact: There may be irritation and redness. The eyes may water profusely.
Ingestion: There may be soreness and redness of the mouth and throat.
Inhalation: There may be irritation of the throat with a feeling of tightness in the chest. Exposure may
cause coughing or wheezing.
Delayed / immediate effects: Immediate effects can be expected after short-term exposure.12 — Safety information
Ecological information
12.1. Toxicity
Hazardous ingredients:
HYDROCARBONS C6-C7 ISOALKANES, CYCLICS, <5% N-HEXANE, <0.1% BENZENE
Daphnia magna 48H EC50 17.06 mg/l
RAINBOW TROUT (Oncorhynchus mykiss) 96H LC50 9.766 mg/l
12.2. Persistence and degradability
Persistence and degradability: Readily biodegradable.
12.3. Bioaccumulative potential
Bioaccumulative potential: The product is not considered to be bioaccumulative
[cont...]
12.4. Mobility in soil
Mobility: Readily absorbed into soil. Highly volatile. Floats on water. Heavier than air.
12.5. Results of PBT and vPvB assessment
PBT identification: This product is not identified as a PBT/vPvB substance.
12.6. Other adverse effects
Other adverse effects: Toxic to aquatic organisms. Toxic to soil organisms.13 — Safety information
Disposal considerations
13.1. Waste treatment methods
Disposal operations: Transfer to a suitable container and arrange for collection by specialised disposal
company.
Recovery operations: Recycling/reclamation of metals and metal compounds.
Waste code number: 16 05 05
Disposal of packaging: Empty cans must not be burned because of explosion hazard. Recycle container where
permitted. Disposal of waste containers must be done in accordance with local and / or
national regulations.
NB: The user's attention is drawn to the possible existence of regional or national
regulations regarding disposal.14 — Safety information
Transport information
14.1. UN number
UN number: UN1950
14.2. UN proper shipping name
Shipping name: AEROSOLS
14.3. Transport hazard class(es)
Transport class: 2
14.4. Packing group
14.5. Environmental hazards
Environmentally hazardous: Yes Marine pollutant: No
14.6. Special precautions for user
Special precautions: No special precautions.
Tunnel code: D
Transport category: 215 — Safety information
Regulatory information
[cont...]
15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
Specific regulations: This product is not, nor does it contain a persistent organic pollutant (POP) according to
Regulation (EC) 2019/1021 and subsequent revisions. This product is not, nor does it
contain any candidate on the REACH SVHC list according to Regulation (EC) 2006/1907
and subsequent revisions. This product is not, nor does it contain, any candidate on the
Endocrine Disruptor list, and any subsequent revisions, classified for human health cat
2 or environmental cat 2, in accordance with EC1272/2008 (ammended 2022)
15.2. Chemical Safety Assessment
Chemical safety assessment: A chemical safety assessment has not been carried out for the substance or the mixture
by the supplier.16 — Safety information
Other information
Other information
Other information: This safety data sheet has been prepared in accordance with Commission Regulation
(EU) No. 2020/878.
* indicates text in the SDS which has changed since the last revision.
Phrases used in s.2 and s.3: H220: Extremely flammable gas.
H222: Extremely flammable aerosol.
H225: Highly flammable liquid and vapour.
H229: Pressurised container: May burst if heated.
H304: May be fatal if swallowed and enters airways.
H315: Causes skin irritation.
H336: May cause drowsiness or dizziness.
H411: Toxic to aquatic life with long lasting effects.
Legal disclaimer: The above information is believed to be correct but does not purport to be all inclusive
and shall be used only as a guide. This company shall not be held liable for any
damage resulting from handling or from contact with the above product.
[final page]