Designed & manufactured in Great Britain
+44 (0) 1443 813500 sales-uk@hotset.com
Hotset

HSTC-FB product configurator

BUILD YOUR
FLOW BOLT SENSOR

Configure an elliptical-tip flow bolt with its protective cable, fixed shaft and tip lengths, sensing element and connection.

Step 1 of 9
Tip Design
HSTC-FB Flow Bolt Sensor Assembly
Technical illustration of a Hotset flow-bolt temperature sensor assembly
Representative assembly shown. Your selections below define the finished sensor construction.
01

Choose the flow profile

Select the tip design

Flow bolts use an elliptical measuring tip.

02

Protect the external connection

Select the cable construction

Choose armour braided cable, armour conduit cable or steel tube.
03

Match the process fitting

Select the thread size

Choose the mounting thread required by the installation.

04

Set the insertion depth

Select the shaft length

Flow bolts are available with a 3, 6 or 9 inch shaft.

05

Set the measuring tip

Select the tip length

Elliptical tips are supplied in one of two fixed lengths.

06

Set the protected lead length

Enter the cable length

Enter the required customer-specified finished cable length.

mm
Whole millimetres only.
07

Select the sensing element

Select the sensor type

Choose Type J, K or T thermocouple, or PT100.

08

Choose the measuring connection

Select the junction style

Choose grounded or isolated construction.
09

Complete the connection

Select the termination

Braided and conduit cables offer five termination choices. Steel tube uses a fixed Standard Plug.
Stage 9
Select the termination

Your complete Hotset part number will appear in the configuration panel.